Peter's keyboard firmware (QMK) https://qmk.fm/
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

rules.mk 2.9KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970
  1. # MCU name
  2. #MCU = at90usb1287
  3. MCU = atmega32u4
  4. # Processor frequency.
  5. # This will define a symbol, F_CPU, in all source code files equal to the
  6. # processor frequency in Hz. You can then use this symbol in your source code to
  7. # calculate timings. Do NOT tack on a 'UL' at the end, this will be done
  8. # automatically to create a 32-bit value in your source code.
  9. #
  10. # This will be an integer division of F_USB below, as it is sourced by
  11. # F_USB after it has run through any CPU prescalers. Note that this value
  12. # does not *change* the processor frequency - it should merely be updated to
  13. # reflect the processor speed set externally so that the code can use accurate
  14. # software delays.
  15. F_CPU = 16000000
  16. #
  17. # LUFA specific
  18. #
  19. # Target architecture (see library "Board Types" documentation).
  20. ARCH = AVR8
  21. # Input clock frequency.
  22. # This will define a symbol, F_USB, in all source code files equal to the
  23. # input clock frequency (before any prescaling is performed) in Hz. This value may
  24. # differ from F_CPU if prescaling is used on the latter, and is required as the
  25. # raw input clock is fed directly to the PLL sections of the AVR for high speed
  26. # clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
  27. # at the end, this will be done automatically to create a 32-bit value in your
  28. # source code.
  29. #
  30. # If no clock division is performed on the input clock inside the AVR (via the
  31. # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
  32. F_USB = $(F_CPU)
  33. # Interrupt driven control endpoint task(+60)
  34. OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
  35. # Boot Section Size in *bytes*
  36. # Teensy halfKay 512
  37. # Teensy++ halfKay 1024
  38. # Atmel DFU loader 4096
  39. # LUFA bootloader 4096
  40. # USBaspLoader 2048
  41. OPT_DEFS += -DBOOTLOADER_SIZE=4096
  42. # Build Options
  43. # change to "no" to disable the options, or define them in the Makefile in
  44. # the appropriate keymap folder that will get included automatically
  45. #
  46. BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
  47. MOUSEKEY_ENABLE = no # Mouse keys(+4700)
  48. EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
  49. CONSOLE_ENABLE = no # Console for debug(+400)
  50. COMMAND_ENABLE = yes # Commands for debug and configuration
  51. NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
  52. BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
  53. MIDI_ENABLE = yes # MIDI controls
  54. AUDIO_ENABLE = yes # Audio output on port C6
  55. UNICODE_ENABLE = no # Unicode
  56. BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
  57. RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
  58. API_SYSEX_ENABLE = no
  59. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
  60. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
  61. DEFAULT_FOLDER = eco/rev2