Peter's keyboard firmware (QMK) https://qmk.fm/
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

rules.mk 3.1KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677
  1. SRC += matrix.c \
  2. i2c.c \
  3. split_util.c \
  4. serial.c
  5. # MCU name
  6. #MCU = at90usb1287
  7. MCU = atmega32u4
  8. # Processor frequency.
  9. # This will define a symbol, F_CPU, in all source code files equal to the
  10. # processor frequency in Hz. You can then use this symbol in your source code to
  11. # calculate timings. Do NOT tack on a 'UL' at the end, this will be done
  12. # automatically to create a 32-bit value in your source code.
  13. #
  14. # This will be an integer division of F_USB below, as it is sourced by
  15. # F_USB after it has run through any CPU prescalers. Note that this value
  16. # does not *change* the processor frequency - it should merely be updated to
  17. # reflect the processor speed set externally so that the code can use accurate
  18. # software delays.
  19. F_CPU = 16000000
  20. #
  21. # LUFA specific
  22. #
  23. # Target architecture (see library "Board Types" documentation).
  24. ARCH = AVR8
  25. # Input clock frequency.
  26. # This will define a symbol, F_USB, in all source code files equal to the
  27. # input clock frequency (before any prescaling is performed) in Hz. This value may
  28. # differ from F_CPU if prescaling is used on the latter, and is required as the
  29. # raw input clock is fed directly to the PLL sections of the AVR for high speed
  30. # clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
  31. # at the end, this will be done automatically to create a 32-bit value in your
  32. # source code.
  33. #
  34. # If no clock division is performed on the input clock inside the AVR (via the
  35. # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
  36. F_USB = $(F_CPU)
  37. # Interrupt driven control endpoint task(+60)
  38. OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
  39. # Boot Section Size in *bytes*
  40. # Teensy halfKay 512
  41. # Teensy++ halfKay 1024
  42. # Atmel DFU loader 4096
  43. # LUFA bootloader 4096
  44. # USBaspLoader 2048
  45. OPT_DEFS += -DBOOTLOADER_SIZE=4096
  46. # Build Options
  47. # change to "no" to disable the options, or define them in the Makefile in
  48. # the appropriate keymap folder that will get included automatically
  49. #
  50. BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
  51. MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
  52. EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
  53. CONSOLE_ENABLE = no # Console for debug(+400)
  54. COMMAND_ENABLE = yes # Commands for debug and configuration
  55. NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
  56. BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
  57. MIDI_ENABLE = no # MIDI controls
  58. AUDIO_ENABLE = no # Audio output on port C6
  59. UNICODE_ENABLE = no # Unicode
  60. BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
  61. RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
  62. SUBPROJECT_rev1 = yes
  63. USE_I2C = yes
  64. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
  65. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
  66. CUSTOM_MATRIX = yes
  67. DEFAULT_FOLDER = deltasplit75/v2