The full syntax of the
make command is
<keyboard_folder>is the path of the keyboard, for example
allto compile all keyboards
<keymap>is the name of the keymap, for example
allto compile all keymaps
<target>will be explained in more detail below.
<target> means the following
allcompiles as many keyboard/revision/keymap combinations as specified. For example,
make planck/rev4:default:allwill generate a single .hex, while
make planck/rev4:allwill generate a hex for every keymap available to the planck.
dfu-util, compile and upload the firmware to the keyboard. If the compilation fails, then nothing will be uploaded. The programmer to use depends on the keyboard. For most keyboards it’s
dfu, but for ChibiOS keyboards you should use
teensyfor standard Teensys. To find out which command you should use for your keyboard, check the keyboard specific readme.
sudo make planck/rev4:default:dfu.
clean, cleans the build output folders to make sure that everything is built from scratch. Run this before normal compilation if you have some unexplainable problems.
You can also add extra options at the end of the make command line, after the target
make COLOR=false- turns off color output
make SILENT=true- turns off output besides errors/warnings
make VERBOSE=true- outputs all of the gcc stuff (not interesting, unless you need to debug)
make EXTRAFLAGS=-E- Preprocess the code without doing any compiling (useful if you are trying to debug #define commands)
The make command itself also has some additional options, type
make --help for more information. The most useful is probably
-jx, which specifies that you want to compile using more than one CPU, the
x represents the number of CPUs that you want to use. Setting that can greatly reduce the compile times, especially if you are compiling many keyboards/keymaps. I usually set it to one less than the number of CPUs that I have, so that I have some left for doing other things while it’s compiling. Note that not all operating systems and make versions supports that option.
Here are some examples commands
make all:allbuilds everything (all keyboard folders, all keymaps). Running just
rootwill also run this.
make ergodox_infinity:algernon:cleanwill clean the build output of the Ergodox Infinity keyboard.
make planck/rev4:default:dfu COLOR=falsebuilds and uploads the keymap without color output.
Set these variables to
no to disable them, and
yes to enable them.
This allows you to hold a key and the salt key (space by default) and have access to a various EEPROM settings that persist over power loss. It’s advised you keep this disabled, as the settings are often changed by accident, and produce confusing results that makes it difficult to debug. It’s one of the more common problems encountered in help sessions.
Consumes about 1000 bytes.
This gives you control over cursor movements and clicks via keycodes/custom functions.
This allows you to use the system and audio control key codes.
This allows you to print messages that can be read using
By default, all debug (dprint) print (print, xprintf), and user print (uprint) messages will be enabled. This will eat up a significant portion of the flash and may make the keyboard .hex file too big to program.
To disable debug messages (dprint) and reduce the .hex file size, include
#define NO_DEBUG in your
To disable print messages (print, xprintf) and user print messages (uprint) and reduce the .hex file size, include
#define NO_PRINT in your
To disable print messages (print, xprintf) and KEEP user print messages (uprint), include
#define USER_PRINT in your
To see the text, open
hid_listen and enjoy looking at your printed messages.
NOTE: Do not include uprint messages in anything other than your keymap code. It must not be used within the QMK system framework. Otherwise, you will bloat other people’s .hex files.
Consumes about 400 bytes.
This enables magic commands, typically fired with the default magic key combo
LSHIFT+RSHIFT+KEY. Magic commands include turning on debugging messages (
MAGIC+D) or temporarily toggling NKRO (
Enables your LED to breath while your computer is sleeping. Timer1 is being used here. This feature is largely unused and untested, and needs updating/abstracting.
This allows the keyboard to tell the host OS that up to 248 keys are held down at once (default without NKRO is 6). NKRO is off by default, even if
NKRO_ENABLE is set. NKRO can be forced by adding
#define FORCE_NKRO to your config.h or by binding
MAGIC_TOGGLE_NKRO to a key and then hitting the key.
This enables your backlight on Timer1 and ports B5, B6, or B7 (for now). You can specify your port by putting this in your
#define BACKLIGHT_PIN B7
This enables MIDI sending and receiving with your keyboard. To enter MIDI send mode, you can use the keycode
MI_OFF to turn it off. This is a largely untested feature, but more information can be found in the
This allows you to send unicode symbols via
UC(<unicode>) in your keymap. Only codes up to 0x7FFF are currently supported.
This allows sending unicode symbols using
X(<unicode>) in your keymap. Codes
up to 0xFFFFFFFF are supported, including emojis. You will need to maintain
a separate mapping table in your keymap file.
Characters out of range supported by the OS will be ignored.
This allows you to interface with a Bluefruit EZ-key to send keycodes wirelessly. It uses the D2 and D3 pins.
This allows you output audio on the C6 pin (needs abstracting). See the audio page for more information.
Uses buzzer to emulate clicky switches. A cheap imitation of the Cherry blue switches. By default, uses the C6 pin, same as AUDIO_ENABLE.
Use this to debug changes to variable values, see the tracing variables section of the Unit Testing page for more information.
This enables using the Quantum SYSEX API to send strings (somewhere?)
This consumes about 5390 bytes.
This enables key lock. This consumes an additional 260 bytes.
If your keymap directory has a file called
rules.mk any options you set in that file will take precedence over other
rules.mk options for your particular keyboard.
So let’s say your keyboard’s
BACKLIGHT_ENABLE = yes. You want your particular keyboard to not have the backlight, so you make a file called
rules.mk and specify
BACKLIGHT_ENABLE = no.