This feature is currently huge at 4400 bytes, and should probably only be put on boards with a lot of memory, or for fun.
The terminal feature is a command-line-like interface designed to communicate through a text editor with keystrokes. It’s beneficial to turn off auto-indent features in your editor.
To enable, stick this in your
TERMINAL_ENABLE = yes
And use the
TERM_OFF keycodes to turn it on or off.
When enabled, a
> prompt will appear, where you’ll be able to type, backspace (a bell will ding if you reach the beginning and audio is enabled), and hit enter to send the command. Arrow keys are currently disabled so it doesn’t get confused. Moving your cursor around with the mouse is discouraged.
#define TERMINAL_HELP enables some other output helpers that aren’t really needed with this page.
Pressing “up” and “down” will allow you to cycle through the past 5 commands entered.
Prints out the current version of QMK with a build date:
> about QMK Firmware v0.5.115-7-g80ed73-dirty Built: 2017-08-29-20:24:44
Outputs the last 5 commands entered
> print-buffer 0. print-buffer 1. help 2. about 3. keymap 0 4. help 5. flush-buffer
Clears command buffer
> flush-buffer Buffer cleared!
Prints out the available commands:
> help commands available: about help keycode keymap exit print-buffer flush-buffer
keycode <layer> <row> <col>
Prints out the keycode value of a certain layer, row, and column:
> keycode 0 1 0 0x29 (41)
Prints out the entire keymap for a certain layer
> keymap 0 0x002b, 0x0014, 0x001a, 0x0008, 0x0015, 0x0017, 0x001c, 0x0018, 0x000c, 0x0012, 0x0013, 0x002a, 0x0029, 0x0004, 0x0016, 0x0007, 0x0009, 0x000a, 0x000b, 0x000d, 0x000e, 0x000f, 0x0033, 0x0034, 0x00e1, 0x001d, 0x001b, 0x0006, 0x0019, 0x0005, 0x0011, 0x0010, 0x0036, 0x0037, 0x0038, 0x0028, 0x5cd6, 0x00e0, 0x00e2, 0x00e3, 0x5cd4, 0x002c, 0x002c, 0x5cd5, 0x0050, 0x0051, 0x0052, 0x004f, >
Exits the terminal - same as