You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Peter J. Jones 0ff59d3b9a
Fix image links
1 year ago
stls Add some feet for the cover, add some bad pictures to the README 1 year ago
GNUmakefile First version of the cover 1 year ago
LICENSE Initial import 1 year ago
README.md Fix image links 1 year ago
minidox-case.scad Add some feet for the cover, add some bad pictures to the README 1 year ago

README.md

Minidox Case

A 3D-printed case for the Minidox.

What You Should Print

Each half will need a case and a top. If you want to print the cover too, make sure you print the case that has the cover option.

What to Expect

After getting everything put together you will probably need to trim some of the key cap openings on the top plate.

Regrettably, I designed the case to have a little bit of wiggle room to make inserting the PCB easier. But this means the PCB and top plate may not align correctly.

Pictures

all done

case with cover shelf

More pictures: http://imgur.com/a/ioUCZ